Porsche Steering Tie Rod Kit - Lemforder 3947201KT

產品資料

OE Numbers（原廠件號）

971423810 971423810B 971423811B 971423812B 971423815 99951268609 N90770201 N10575201

MFG Numbers（製造商件號）

3947201 3947301 3947401

產品描述 Description

The steering rack uses an inner and outer tie rod that serves as the link between the steering rack and the steering knuckle and what the steering input acts upon to turn the wheels. They are also used to adjust the toe setting for the front wheel alignment. Both tie rods use a ball joint to pivot based on the wheel and suspension movement. Wear in the tie rods occurs through movement and impact within the ball joint socket. This wear can be accelerated if driven on rough roads. Worn and loose tie rod ball joints will cause a loose steering feel and reduced steering feedback and may clunk over bumps. It will also cause uneven tire wear as the wheel alignment moves out of specification. And, if the tie rod boots are torn, it will allow water and dirt to get into the joints contributing to their failure. Restore the steering and driving performance of your Porsche Panamera with our Steering Tie Rod Kit. Our kit includes the left and right inner and outer tie rods with new hardware, tie rod boots, and clamps for a complete solution-based repair. A front wheel alignment is required after replacing the tie rods. Steering Tie Rod End Kit The tie rods of your vehicle play a critical role as they're the link between the power steering rack and pinion and the wheel spindle. Tie rod ends contain ball joints that tend to wear out over time due to constant wear and tear. When the ball joints within the tie rod wear out, it allows for play within the wheels which can throw off your alignment and cause uneven tire wear. Its always encouraged to check your tie rod ends for play as well as tires for uneven wear at every service interval. When replacing worn tie rod ends its always recommend to replace them in pairs as well as to perform an alignment. Steering Tie Rod End Kit Failure Symptoms Uneven Tire Wear Play In Wheels Pulling Condition When Driving Sloppy Steering Poor Steering Response Torn Ball Joint Boots About Lemforder LEMFÖRDER is the No.1 brand in original equipment steering and chassis components. As a trusted partner of over 50 vehicle manufacturers worldwide LEMFÖRDER is a leader in the development of innovative passenger car, motorcycle, HCV and off-road chassis technology. Lemforder is a quality innovator in the fields of steering and suspension system parts and is often the OE (original equipment) of suspension parts for car brands including BMW, Mercedes-Benz, Volvo and more. Founded in Lemförde near Bremen, LEMFÖRDER still engineers over 90% of its parts in Germany. As part of a global organization, LEMFÖRDER follows the footprints of the automotive industry and has production and engineering sites all over the world. Each LEMFÖRDER part is rigorously tested before entering the market. For over 70 years LEMFÖRDER has been known for its pioneering spirit and passion for detail – setting the highest standards in steering and suspension. As an OE supplier to vehicle manufacturers for decades, LEMFÖRDER has a reputation for developing products that are perfectly suited to the overall vehicle system. Lemforder many times matches OE quality and are considered either OE or OEM for many popular European models. In fact, many of their parts are made on the same line as the original and have had the BMW logo milled or ground off to be sold under the Lemforder label instead. Lemforder is of equal quality as many of the Genuine parts available with Lemforder coming in at a significant cost savings.